Leon Mk1
installation diagram |
1 - | Bracket for ancillaries |
q | Observe the tightening torque → Chapter |
2 - | Hexagonal bolts with collar |
q | top 2 x M10 x 65 |
q | bottom 1 x M10 x 45 with adjustment sleeve |
q | 40 Nm |
q | Observe the tightening torque → Chapter |
3 - | Voltage regulator |
q | Remove and install voltage regulator → Chapter |
4 - | Star-head screw |
q | M4 x 18 |
q | 2 Nm |
5 - | Alternator guard |
6 - | Hexagon bolts |
q | M4 x 20 |
q | 2 Nm |
7 - | Alternator |
q | Alternator: removing and fitting → Chapter |
q | Removal and installation of the poly V belt pulley on the alternator → Chapter |
q | Check alternator → Chapter |
q | Fixing the battery's positive cable to the alternator → Chapter |
8 - | Poly-V belt |
q | Routing of poly V-belt → Engine assembly; Rep. Gr.13. |
q | Check poly-V belt → Chapter |
9 - | Hexagonal bolts with collar |
q | M8 x 35 |
q | 25 Nm |
10 - | Hexagonal bolts with collar |
q | M8 x 92 |
q | 20 Nm |
11 - | Tensioning spring |
|