Leon Mk1
| installation diagram |
| 1 - | Bracket for ancillaries |
| q | Observe the tightening torque → Chapter |
| 2 - | Hexagonal bolts with collar |
| q | top 2 x M10 x 65 |
| q | bottom 1 x M10 x 45 with adjustment sleeve |
| q | 40 Nm |
| q | Observe the tightening torque → Chapter |
| 3 - | Voltage regulator |
| q | Remove and install voltage regulator → Chapter |
| 4 - | Star-head screw |
| q | M4 x 18 |
| q | 2 Nm |
| 5 - | Alternator guard |
| 6 - | Hexagon bolts |
| q | M4 x 20 |
| q | 2 Nm |
| 7 - | Alternator |
| q | Alternator: removing and fitting → Chapter |
| q | Removal and installation of the poly V belt pulley on the alternator → Chapter |
| q | Check alternator → Chapter |
| q | Fixing the battery's positive cable to the alternator → Chapter |
| 8 - | Poly-V belt |
| q | Routing of poly V-belt → Engine assembly; Rep. Gr.13. |
| q | Check poly-V belt → Chapter |
| 9 - | Hexagonal bolts with collar |
| q | M8 x 35 |
| q | 25 Nm |
| 10 - | Hexagonal bolts with collar |
| q | M8 x 92 |
| q | 20 Nm |
| 11 - | Tensioning spring |
|
