seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing rubber grommet > < Adjusting wiper arm

Leon Mk1

Removing and installing rear window wiper motorV12
Removing and installing rear window wiper motor -V12-
Removal:
–  Remove the windscreen wiper arm → Chapter.
–  Remove trim at bottom of tailgate → Rep. gr.70.
   
–  Unplug the electrical connector -2-.
–  Unlock the securing clip-arrow A- and separate the washing water line at the connection pipe -3- of the nozzle .
–  Unscrew the nuts -arrow B- and remove the motor for rear window wiper -V12--Pos. 1-.
Installation
l  Tightening torque → Chapter
Installation is carried out in reverse order, noting the following:
l  Washer fluid hose must engage audibly in washer jet connection.
–  Install the trim at bottom of tailgate → Rep. gr.70.
–  Set the windscreen wiper arms → Chapter.
  A92-10129

Removing and installing rubber grommet > < Adjusting wiper arm