seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Wiper arm: fitting > < Wiper arm: removing
Motor for the rear window wiper: Removing and installing
   
Motor for the rear window wiper: Removing and installing
Removing:
–  Remove lower panelling of tailgate → Bodywork, interior fitting work; Rep. gr.70
–  Detach connector.
–  Disconnect the hose -2- of the windscreen washer system.
–  Unscrew the hexagonal nuts -arrows-.
–  Carefully remove rear tailgate motor.
  E92-10004
Installing:
Installation is carried out in the reverse order. When installing, note the following:
–  Check that the gasket -arrow- is correctly adjusted to desired orifice in window.
–  Connect battery.
  N92-0107

Wiper arm: fitting > < Wiper arm: removing