seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Multi connectors behind the relay plate: removing and installing > < Removing

Leon Mk1

Installing
Installing
–  Position the fuse box on the battery, inserting the conducting plate into the securing pin of the positive terminal of the battery.
–  Hook the tension bracket of the fuse box to the battery.
–  Screw in the securing screw.
Tightening torque: 6 Nm
–  Close the thermal protection of the battery if there is one.
   
–  Screw in the securing screw -1- from the battery positive terminal conducting plate.
–  Reconnect the cables that were disconnected from the sheet fuses and tighten the securing screws -2-.
  Note!
t  The order of the connections is specified in the relevant current circuit diagram:
t  → Current flow diagrams, Electrical fault finding and Fitting locations
  N97-0185
–  Fit the connector -3- .
–  Position the cover of the fuse box and close it.
  N97-0185

Multi connectors behind the relay plate: removing and installing > < Removing