seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Checking and servicing alternator > < Suppression measures

Leon Mk1

  • Vehicle electrics
  • Electrical system: General information
  • Starter-current supply-CC
  • Cruise control system (GRA)

Activating and deactivating cruise control system (CCS)
Activating and deactivating cruise control system (CCS)
Checking sequence
–  Connect vehicle diagnostic, testing and information system -VAS 5051B- 5052- 5052A- → Chapter.
  Note
A fault message is shown on the display → Operating manual VAS 505X.
–  Press the Guided Functions key.
   
Indication on -VAS 505X-:
–  Enter vehicle identification by touching the appropriate message line -1- in accordance with the selection prompt -A-.
The vehicle diagnostic, testing and information system -VAS 5051B- 5052- 5052A- then switches to the next selection step (example; steps may also be skipped depending on vehicle model):
  A01-0123
Selection promptLine to be selected
Select brand„SEAT“
Select model (example)„EXEO 09>“
Select model year (example)„2009 (9)“
Select version (example)„LIMOUSINE“
Select engine code (example)„CAGA 2,0TDI 105 kW“
If vehicle identification has been implemented correctly, press the → button to confirm. 
Select vehicle system/function (example)01 - Engine electronics
Select vehicle system/functionJ220 - Activating or deactivating CCS

–  Continuation and note information on display of -VAS 5051A-.
After activation/deactivation:
–  Press Go to key.
–  Select „End“ function in list.
–  Switch off ignition and separate diagnostic connection.
  Note
If entry into „Guided functions“ mode is not possible as described with older engine control unit generations, the presence/absence of the cruise control system is programmed in the engine control unit hardware.
   

  • Vehicle electrics
  • Electrical system: General information
  • Starter-current supply-CC
  • Cruise control system (GRA)

Checking and servicing alternator > < Suppression measures