seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Central Cover for Radio/Heating and Radio/Autoclimate: dismounting and mounting|Mount: > < Central Cover for Radio/Heating and Radio/Autoclimate: dismounting and mounting

Leon Mk1

Dismount:
   
Dismount:
  Note!
In order to carry out this repair, the following must be taken into account: do it on a work bench, make sure both the work place and tools are clean. Take great care in the assembly and tightening of the screws, do not force them in.
l  Once the fault has been identified and the cover has been removed, the controls for the radio or the Autoclimate can be dismounted, removing the screws that hold down the electrical circuit.
–  The radio circuit, held in place by 16 Torx head screws, -T6- key -arrows-.
–  Heating or Autoclimate circuit, held in place by 8 Torx head screws, -T6- key -arrows-.
  E91-0025
–  Separate the two parts, printed circuit and push-button mechanics.
–  Check all the anchors for the metal sheets which carry out the function of a return spring for the push-buttons once released.
–  In the event of a breakage or a loose sheet in any of its anchors the whole cover must be changed.
  E91-0026
l  Should the breakage be in one of the push-buttons, the latter may be dismounted and changed:
l  The breakage in the push-button may arise in the anchor -1- or else in the pushing sheet -arrow- for working.
–  Take out the broken push-button by pressing down the visible anchors -1- not covered by the metal sheet, then push the whole body -2- to extract it all.
  Note!
  E91-0027
SEAT spares service provides the push-buttons in bags for separate sets, radio or Autoclimate/Heating controls.
  E91-0031

Central Cover for Radio/Heating and Radio/Autoclimate: dismounting and mounting|Mount: > < Central Cover for Radio/Heating and Radio/Autoclimate: dismounting and mounting