seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Gear stick and protective box: repair > < Position for assembly of the mechanism for working the gearbox

Leon Mk2

Handle and cover of the gear stick: dismounting and assembling
   
Handle and cover of the gear stick: dismounting and assembling
1 - Handle for the gear stick
q   Dismount and assemble together with the cover.
2 - Cover
q   Remove from the handle → Fig.
q   Attach to the handle before assembling it → Fig.
q   Dismount and assemble together with the handle for the gear stick.
3 - Attachment sleeve
4 - Clamp
q   For attaching the handle to the gear stick.
q   Tighten → Fig.
5 - Rubber protection
q   It is fitted into the flanges for attaching the cover.

   
Assemble the handle of the gear stick
–  Turn the cover inside out and insert the handle of the gear stick inside it -arrow-.
–  Put the attachment sleeve into its housing.
  Note!
The flanges for the attachment sleeve must remain fitted into the housing in the handle.
–  Put the clamp over the handle and assemble it on the gear stick, fitting it in as far as it will go.
  E34-0144
Tighten the clamp -arrow- for the handle of the gear stick
  Note!
To tighten the clamp, tool -T20072- can also be used.
–  Fit the cover into the central console.
  N34-1201

Gear stick and protective box: repair > < Position for assembly of the mechanism for working the gearbox