| Removing and installing securing washer |
| –
| To remove and install securing washers, pull the gearshift lever in the direction of arrow -A-, and at the same time press downwards on the spacer with a screwdriver in the direction of arrow -B- all the way downwards. |
Note | t
| Do not tilt the spacer when pressing it. Access must be available to the groove in the gear lever where the securing ring is seated. Loosen the spring carefully. |
| t
| The groove in the gear lever where the securing ring is seated must be in sight. |
| t
| Loosen the compression spring. |
|
|
|
