seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Clutch pedal: removing and fitting > < Removing

Leon Mk2

Installation
Installation
–  Lubricate the end of the rod with lubricating grease, according to → Parts catalogue..
–  Fit the clutch master cylinder to the pedal bracket and insert the over-centre spring seat.
   
–  Fit the clutch pedal bracket -4- to the base of the dashboard and tighten the new bolts -arrows- to a torque of 25 Nm.
–  Install clutch pedal stop -2-.
The remaining installation steps are carried out in reverse sequence to removal operations - note the following points:
–  After having fitted the clutch slave cylinder, the clutch system must be bled of air → Chapter.
  E30-10030

Clutch pedal: removing and fitting > < Removing