Leon Mk2
Cover for gearbox casing and 5th gear - general assembly overview |
1 - | Gearbox |
2 - | 5thª gear pinion |
q | Installation position: the collar should be orientated towards the gearbox casing cover → Item |
q | removing and fitting → Chapter |
3 - | Circlip |
q | replace |
q | Determine thickness → Anchor |
q | removing and fitting → Chapter |
4 - | Seal |
q | replace |
5 - | Gearbox casing cover |
q | removing and fitting → Chapter |
6 - | 5 Nm + further 1/4 (90°) |
q | replace |
7 - | Circlip |
q | replace |
q | Determine thickness → Fig. |
8 - | Mobile sleeve with 5th gear synchromesh: |
q | Disassembling and assembling the heating system → Chapter |
9 - | Synchromesh ring of 5th gear: |
10 - | 5th speed selector gear |
11 - | Needle roller bearing |
q | For 5th gear |
12 - | 5th gear prong |
q | Disassembling and assembling the heating system → Chapter |
13 - | Support bolt |
q | For the 5th gear prong |