seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Check 5th gear synchromesh ring for wear > < Dismantling

Leon Mk2

Assembling
Assembling
–  To fit, slide the mobile sleeve onto the synchromesh.
l  Fitting position: : the thinnest grooves -arrow C- of the synchromesh locking elements are aligned with the grooves -arrow D- of the mobile sleeve.
   
–  Fit the locking elements in the deepest grooves -arrows- and fit the springs off-set by 120º. Angled end of spring must locate in hollow locking piece.
  A35-0024
–  Insert the end ring on the guide socket -T20132-.
–  Insert the stop / end ring along with the guide socket -T20132- onto the 5th gear synchromesh and mobile sleeve (note the installation position → Chapter).
l  The hooks -arrow 1- should be inserted in the grooves -arrow 2- of the synchromesh locking elements.
–  Press stop ring downwards until hooks engage.
–  Separate the guide sleeve -T20132-.
  E35-0157

Check 5th gear synchromesh ring for wear > < Dismantling