SEAT Workshop Service and Repair Manuals

Tightening torques

Vehicles with 2.0 litre 110 kW FSI engine: Gearbox to engine attachments

Item	Bolt.	Control units	Nm
1	M12 x 55	1	80
2	M12 x 55	1	80
3 → Remark → Remark	M12 x 165	1	80
4 → Remark → Remark	M12 x 165	1	80
5	M10 x 65	1	40
6	M10 x 55	1	40
7	M10 x 55	1	40
8	M10 x 85	1	40
A	dowel sleeves for centring

1)  M8 threaded pin with bolts 2)  This bolt also secures the starter motor to the gearbox.

Gearbox console to gearbox and gearbox supports

Component		Nm
Gearbox console -A- to the gearbox, -bolts 1-		40 + 90° → Remark → Remark
Gearbox console -A- to the gearbox support, bolts -2-		60 + 90° → Remark → Remark

3)  Renew bolts 4)  90º is equivalent to a quarter turn.   Note Fit the power train support without tension → Engine, mechanics; Rep. gr.10.

Torque converter to the drive plate

Component		Nm
Torque converter to the drive plate, 6 bolts -arrow-		57 → Remark

5)  Renew nuts. All other bolted joints

Component		Nm
Bolts/nuts	M6	10
	M8	20
	M10:	45
	M12	65