Leon Mk2
| Clutch hydraulic system: assembly overview |
| 1 - | Brake fluid deposit |
| 2 - | Return hose |
| 3 - | Clutch master cylinder |
| q | Removing and fitting → Chapter |
| 4 - | Staple |
| q | Extract to the limit to remove and to fit the connected hose lines. |
| 5 - | Mounting |
| q | Always remove master cylinder to replace |
| q | Releasing → Fig. |
| q | Insertion → Fig. |
| 6 - | Clutch pedal |
| q | Removing and fitting → Chapter |
| 7 - | Hexagonal nut, self-locking |
| q | Tightening torques: 25 Nm |
| q | Always replace |
| q | Number of: 2 |
| 8 - | O ring |
| q | Always replace |
| q | Always fit moistened with brake fluid |
| 9 - | Pipe/hose assembly |
| q | With frequency modulator |
| q | Allocation → Spare parts catalogue |
| 10 - | Bracket |
| q | Fixed onto the bodywork |
| 11 - | Bleeding equipment |
| 12 - | Bleeding valve with protective cap |
| q | Purging the clutch control → Chapter |
| 13 - | Clutch cylinder: |
| q | Removing and fitting → Chapter |
| 14 - | Staple |
| q | Extract to the limit to remove and to fit the connected hose line. |
|
|
|
|
|
|
| Position. | Connection type |
| -1- | Connection with groove -arrow1- |
| -2- | Connection with recess -arrow 2- |
