seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Selector lever control cable - Assembly overview > < Removing

Leon Mk2

Installation
Installation
Installation is carried out in the reverse sequence; note the following:
   
–  Apply a small amount of polycarbamide grease in the securing element casting of the gear shift cable -A-, and selector cable -B-.
  E34-0305
–  Fit the cables in the securing elements, rotate all the way the securing mechanism of the shift and selection cables to the right -arrow-.
The spring returns the safety mechanism to the initial position.
–  Adjust the gear selection mechanism → Chapter.
–  Install exhaust system and align without strain → Rep. Gr.26.
–  Fit the battery → Electrical system; Rep. Gr.27.
–  Remove air filter housing; gasoline engines → Rep. Gr.24 and diesel engines → Rep. Gr.23.
  E34-0308

Selector lever control cable - Assembly overview > < Removing