Leon Mk2
Note
|
| 1 - | Gearbox |
| q | If this is replaced then the → Chaptersecondary shafts → Chapterand the differential → Chaptermust be adjusted |
| 2 - | Cover |
| q | Removing → Fig. |
| q | Insertion → Fig. |
| 3 - | Empty plug for Oil |
| q | Allen screw, -30 Nm |
| q | Bolt with internal grooved head - 45 Nm |
| 4 - | Sealing ring |
| q | replace |
| 5 - | Oil filler plug |
| q | Allen screw, -30 Nm |
| q | Bolt with internal grooved head - 45 Nm |
| 6 - | Locking bolt |
| q | Adjust gear selector mechanism → Chapter |
| q | This may be replaced with the gearbox without disassembling |
| q | Removing → Fig. |
| q | Installation position → Fig. |
| q | Insertion → Fig. |
| 7 - | Bearing sleeve for the control rods |
| q | Remove → Fig. |
| q | Insertion → Fig. |
| 8 - | Insertion sleeve |
| q | Remove with the gearbox disassembled |
| q | Insertion → Fig. |
| 9 - | Point crown for the inverter shaft |
| q | Replace after removing |
| q | Remove → Fig. |
| q | Insertion → Fig. |
| 10 - | Outer ring of roller bearing |
| q | For secondary shaft for 5thª/6thª and reverse gear |
| q | Remove → Fig. |
| q | Insertion → Fig. |
| q | If replaced, the secondary shaft for 5thª/6thª and reverse gear must be readjusted → Chapter |
| 11 - | Shim |
| q | For secondary shaft for 5thª/6thª and reverse gear |
| q | Adjustment chart → Chapter |
| 12 - | Outer ring of roller bearing |
| q | For secondary shaft for 1stª to 4thª gear |
| q | Remove → Fig. |
| q | Insertion → Fig. |
| q | If replaced, the secondary shaft for 1stª/4thª gear must be readjusted → Chapter |
| 13 - | Shim |
| q | For secondary shaft for 1stª to 4thª gear |
| q | Adjustment chart → Chapter |
| 14 - | Outer ring of roller bearing |
| q | For the differential |
| q | Removing and installing |
| q | If replaced the differential must be replaced → Chapter |
| 15 - | Shim |
| q | For the differential |
| q | Adjustment chart → Chapter |
| 16 - | Bearing socket for the selection shaft |
| q | Remove |
| q | Insertion |
| 17 - | Sealing plug |
| q | Releasing |
| q | Insertion |
| 18 - | Sealing ring |
| q | replace |