–
| Remove protection hood on brake bleeder bolt and connect hose -arrow- of air bleeding bottle to this bolt. |
–
| Now start the brake bleeder -SAT 1175B-. |
l
| Working pressure: 2.0 bar |
–
| Open air bleeding screw with the tube of the air bleed bottle attached and let it bleed some 100 cm3 of brake fluid. |
–
| Quickly operate pedal from limit to limit 15 times. |
–
| Open air bleeding element bolt and bleed another 50 cm 3 of brake fluid. |
–
| Tighten air bleeding bolt to 6 Nm, remove bleeding hose and fit protection hood. |
–
| Remove brake bleeder -SAT 1175B- from brake fluid reservoir. |
–
| Operate clutch pedal several times once air bleeding process is completed. |
–
| If necessary, bleed air again. |
|
|
|