seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Clutch release assembly, clutch slave cylinder: repairs > < Removal:

Leon Mk2

Installation
Installation
Move the clutch pedal to the rest position, up to the limit.
   
–  Fit the safety clip -2- onto actuating bar -1- of the master cylinder.
  A30-0120
–  Insert a spacer -A- between the clutch pedal and the top limit and press the pedal towards the spacer. Length of spacer = approx. 40 mm (e.g. 1/2").
–  Block the clutch master cylinder on the support stand -arrow 1- and -arrow 2-.
  A30-0121
–  Push the actuating bar -1- of the clutch master cylinder towards the -arrow- until the safety clip -2- until safety clip audibly clicks into clutch pedal housing.
–  Install mounting bracket → Chapter.
–  Bleed air from hydraulic clutch system → Chapter.
  A30-0122

Clutch release assembly, clutch slave cylinder: repairs > < Removal: