Leon Mk2
|
| 1 - | Selector lever |
| 2 - | Indicator lighting |
| q | In right-hand drive vehicles, there is an additional contact that prevents the engine from being started when locking button on “selector lever handle” is pressed. |
| q | Adjusting starter inhibitor switch (right-hand drive vehicles only) → Chapter. |
| 3 - | Clip |
| q | For securing selector lever cable. |
| 4 - | Locating screw |
| q | For securing selector lever cable. |
| q | Adjusting selector lever cable → Chapter. |
| 5 - | Nut, 15 Nm |
| q | Inserting with locking fluid -AMV 185 101 A1-. |
| 6 - | Lever |
| 7 - | Bolt |
| 8 - | Bush |
| q | Placing in locking lever → Fig.. |
| 9 - | Locking lever |
| q | Placing in selector lever with spring and bush → Fig.. |
| 10 - | Spring |
| q | For locking lever → Fig.. |
| 11 - | Selector lever lock solenoid -N110- |
| q | Can be checked in measured value block → Automatic gearbox 099, four-wheel drive -Self-diagnosis-; Rep. Gr.01. |
| 12 - | Wiring harness |
| 13 - | Hexagon bolt, 3 Nm |
| q | Inserting with locking fluid -AMV 185 101 A1-. |
|
|
