SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Bleeding clutch system >
< Removing
Leon Mk2
6-speed manual gearbox 02N
Clutch, control
Repairing clutch mechanism / moving_and_installing_pipe/hose_line/">Removing and installing pipe/hose line
Installing
Installing
Installing
Carry out installation in the reverse sequence, noting the following:
–
Install pipe/hose line in supports on flange of master brake cylinder
-1-
and on gearbox
-2-
.
Vehicles with turbo diesel engine
–
Install fuel filter
-A-
→ Rep. Gr.20
.
Continuation for all vehicles
When installing slave cylinder bleeder connection, observe the following:
l
Clip
-B-
is pulled out.
–
Insert pipe/hose line
-A-
into slave cylinder bleeder connection
-C-
to stop.
–
Only now can clip
-B-
be pushed in to stop
-in direction of arrow-
.
When installing master cylinder, observe the following:
l
Clip
-A-
is pulled out.
–
Push pipe/hose line
-B-
into master cylinder.
–
Only now can clip
-A-
be pushed into master cylinder to stop.
–
Remove hose clamp -3094- from supply hose
-A-
.
–
Install ABS hydraulic unit
→ ABS system; Rep. Gr.45
.
–
Bleed clutch system after installing pipe/hose line
→ Chapter
.
–
Install battery and battery holder
→ Electrical system; Rep. Gr.27
.
–
Bolt on coolant expansion tank.
–
Push connector onto coolant expansion tank.
–
Install battery trim
-2-
.
–
Install air duct trim
-1-
-arrows-
.
–
Connect earth strap to battery.
Note!
Note radio code for vehicles with coded radio.
6-speed manual gearbox 02N
Clutch, control
Repairing clutch mechanism / moving_and_installing_pipe/hose_line/">Removing and installing pipe/hose line
Installing
Bleeding clutch system >
< Removing