| t
| Propshaft tubes are marked with a spot of paint on the flanges. |
| –
| When bolting propshaft tubes together, line up spots of paint, dot to dot. |
| –
| If flanges of propshaft tubes are to be removed, first transfer spots of paint to flanges. |
| This will ensure that imbalance in the entire propshaft will be insignificant. |
| Installing centre bearing free of tension |
| –
| Align centre bearing in its elongated holes so that propshaft is not under tension. |
| –
| After installing propshaft, tighten centre bearing bolts to body to 20 Nm torque. |
|
|
|
