| –
| Press in pipe and hose assembly -1- with a new seal -2- in clutch master cylinder connection -4- until safety fastener -3- is audibly secured. |
| –
| Pull pipe and hose assembly to check it is properly secured. |
| –
| Fit the anti-collision reinforcement. |
| –
| Fit the footwell area vent, the cable guide, driver's side cover → Rep. Gr.68. |
| –
| Fit the battery support, the battery cover and the battery → Rep. Gr.27. |
| –
| Bleed air from hydraulic clutch system → Chapter. |
|
|
|
