SEAT Workshop Service and Repair Manuals > Leon Mk2 > 6-speed manual gearbox 02Q, all-wheel drive | Clutch, control | Clutch mechanism: repairs | Removing and installing master cylinder

Installation

Move the clutch pedal to the rest position, up to the limit.

–	Fit the safety clip -2- onto actuating bar -1- of the master cylinder.

–	Insert a spacer -A- between the clutch and the top limit and press the clutch pedal towards the spacer. Length of spacer = approx. 40 mm (e.g. 1/2").

–	Block the clutch master cylinder on the support stand -arrow 1- and -arrow 2-.

–	Push the actuating bar -1- of the clutch master cylinder towards the -arrow- until the safety clip -2- until safety clip audibly clicks into clutch pedal housing.

–	Install mounting bracket → Chapter.

–	Hydraulic clutch system: bleeding of air → Chapter.

SEAT Workshop Service and Repair Manuals