seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Gearbox: Removing and installing > < Removing

Leon Mk2

Fitting
Fitting
  Note
Lubricate the support points and contact surfaces with grease → Parts catalogue.
Fit the fastener on the idler rod
  Note
The idler rod must be removed.
   
–  The fastener should only be fitted into the bushing-arrow-.
–  The cable fastener should run smoothly over the idler rod.
–  It must stay behind the spring.
Fit the idler rod
  N34-10902
–  Press the rod tab downwards and enter the lower axle into the pivot as far as it can go. It must stay behind the tab-arrow 1-.
  Note
Ignore pos-2-.
–  The idler rod should move smoothly on its pivot.
  N34-10903

Gearbox: Removing and installing > < Removing