seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Check the pair of bevelled gears oil level > < Pair of bevelled gears: fitting

Leon Mk2

Tightening torques
Tightening torques
   
Fit the gearbox support in petrol engine vehicles
To fit the gearbox support the following fitting order must be observed:
–  Screw in the bolts -arrows 1- only tightening them by hand.
–  Tighten bolts -arrows 2- to 40 Nm.
–  Tighten bolts -arrows 1- to 40 Nm.
  A34-10106
Fit the gearbox support - diesel engine with particulate filter
bolt assignment
  N34-10717
ItemBoltAmount
1M10 x 213
2M10 x 452
3M10 x 621

To fit the gearbox support the following fitting order must be observed:
–  Tighten all the bolts by hand.
–  Tighten bolts -arrows 2- and -arrow 3- to 40 Nm.
–  Tighten bolts -arrows 1- to 40 Nm.
   
Component Nm
Right flanged shaft to differential33
Bevelled gears to manual gearbox
t  Renew bolts
40
Pendular support to the gearbox
t  Replace bolts
40 + 90°
Heat shield for the right drive shaft to the bevelled gears20

   

Check the pair of bevelled gears oil level > < Pair of bevelled gears: fitting