seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Clutch release mechanism > < Assembly overview - hydraulics (RHD)

Leon Mk2

Bleeding clutch system
Bleeding clutch system
Special tools and workshop equipment required
   
t  Brake filling and bleeding equipment -VAS 5234- or
  W00-1101
t  Brake filling and bleeding equipment -V.A.G 1869-
  Note
Prefilling system is not necessary!
Specifications for brake fluid → Brake systems; Rep. gr.47.
–  Remove complete air filter housing, if not accessible through bleeding equipment (-arrow- in previous figure) → Rep. gr.23.
–  Connect brake filling and bleeding equipment -VAS 5234- respectively -V.A.G 1869-.
The bleeder hose -VAG 1238/B3- is necessary for the bleeding process.
–  Connect bleeder hose to collector bottle of brake bleeding equipment.
  W00-0457
–  Connect bleeder hose -A- to bleeder -arrow-.
–  Pressurise system to 2 bar.
–  Open bleeder valve by rotating 1/4.
–  Move clutch pedal 15 to 20 times quickly by hand from stop to stop.
–  Close bleeder valve and switch off brake bleeding equipment.
–  After completing bleeding procedure, when the pressure of 2 bar is released, operate clutch pedal ten more times by foot.
–  Install the complete air filter housing, provided that this was previously removed → Rep. gr.23.
  N30-0311

Clutch release mechanism > < Assembly overview - hydraulics (RHD)