seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Clutch for vehicles with 1.4 l petrol engine > < Installing

Leon Mk2

Coupling unit
Coupling unit
→ Chapter „Clutch for vehicles with 1.4 l petrol engine“
→ Chapter „Clutch for vehicles with turbo diesel engine“
  Note
t  Renew clutch plate and pressure plate if riveted joints are damaged or loose.
t  Renew pressure plate and clutch plate together only.
t  Select clutch plate and pressure plate according to engine code and → Electronic parts catalogue „ETKA“.
t  Clean input shaft splines and, on used clutch plate, hub splines. Remove corrosion and apply only a very thin coat of clutch plate spline grease -G 000 100- to splines. Then move the clutch plate on the input shaft from side to side, until the hub moves smoothly on the shaft. Excess grease must be removed.
t  Pressure plates are protected against corrosion and greased. Only the contact surface may be cleaned, otherwise the service life of the clutch will be considerably reduced.
t  Pressure plate contact surface and clutch plate lining must make full contact with flywheel. Only then insert bolts.
   

Clutch for vehicles with 1.4 l petrol engine > < Installing