Leon Mk2
|
| 1 - | Selector cover with knob |
| q | Do not remove knob without reason. Only unclip cover for emergency release → Chapter. |
| q | Before removing knob, pull lock button out past its pressure point. Secure locking button with a cable tie or appropriate wire against being pressed in. This will prevent lock button from being accidentally pressed into the knob. |
| q | Removing and installing → Chapter>>>>>>>> |
| 2 - | Selector lever and gear selection mechanism with gear selector cable |
| q | With selector lever lock solenoid -N110- |
| q | Do not lubricate the gear selector cable |
| q | Removing and installing → Chapter>>>>>>>> |
| q | check → Chapter |
| q | Adjust convergence → Chapter |
| 3 - | Bolt. |
| q | 8 Nm |
| 4 - | Hexagon flange nut |
| q | M6 - 8 Nm |
| q | M8 - 20 Nm |
| q | 4x |
| 5 - | Lever protection box |
| 6 - | Locking plate |
| q | Replace after each removal |
