seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Selector lever in ?P? position and ignition switched on > < Removing / fitting the gear lever knob and cover
Checking selector mechanism
Checking selector mechanism
The starter must not turn in the selector lever positions „R“, „D“ or „S“.
On a right-hand drive vehicle, starter must only turn in selector lever positions „P“ and „N“ when lock button is not pressed.
To change the selector lever to position „N“ at speeds above 5 km/h, the selector lever locking solenoid should not engage, thus permitting a change to a different range.
When travelling at speeds below 5 km/h (almost stationary) and engaging selector lever position „N“, solenoid for selector lever lock should only engage after about 1 second. Selector lever cannot be shifted out of „N“ position until brake pedal is depressed.
   

Selector lever in ?P? position and ignition switched on > < Removing / fitting the gear lever knob and cover