seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Installing > < Gearbox input speed senderG182 / oil temperature sender for multi-plate clutchG509 Removing and installing

Leon Mk2

Detaching
Detaching
   
Brief description
Both senders are combined in one component and can be renewed together only. They are »bathed in oil« in gearbox near the multi-clutch. Before removal, the mechatronic unit for dual clutch gearbox -J743- must be removed.
The sensor cable is often damaged due to pulling on it. Consequently, if the cable is pulled on, the sender must be renewed.
–  Remove the mechatronic unit for dual clutch gearbox -J743- → Chapter.
Do not pull on the cable.
  N01-0453
–  Undo the bolt and remove the sender by carefully levering with a screwdriver and/or pliers.
  N34-10515

Installing > < Gearbox input speed senderG182 / oil temperature sender for multi-plate clutchG509 Removing and installing