seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing selector lever cable > < Checking and adjusting selector lever cable

Leon Mk2

Automatic gearbox 099 four-wheel drive
Servicing shift mechanism
Dismantling and assembling selector mechanism
 
N37-0390
  • Selector lever handle
  • Set screw, 1.5 Nm
    • ◆ When tightening, press selector lever handle down
  • Selector lever trim
  • Cover
    • ◆ With selector indicator and cover decor
  • Centre console
    • ◆ Removing and installing =>from Page 37-10
  • Bolt, 1.5 Nm
  • Spring
 
N37-0390
  • Selector lever
    • ◆ Dismantling and assembling
    • ◆ Assemble before installing in selector lever housing
    • ◆ Wiring routing => Page 37-14
    • ◆ Wiring routing RHD vehicle => Page 37-15
  • Bolt, 25 Nm
    • ◆ Qty. 3
    • ◆ For securing the selector lever
    • ◆ Insert with AMV 185 101 A1
  • Selector lever cable with guide tube
    • ◆ Do not bend or kink , lightly grease cable eyelet and cable ends before installing
    • ◆ Removing and installing => Page 37-8
  • Lever
    • ◆ For selector shaft
 
N37-0390
  • Support bracket
    • ◆ For selector lever cable
  • Bolt, 10 Nm
  • Gearbox
  • Nut, 13 Nm
  • Selector lever housing
    • ◆ Need not be removed to replace selector lever cable or individual parts of selector mechanism
    • ◆ To remove, remove front propshaft and unbolt heat shield => Page 39-89
  • Gasket
    • ◆ Glue to underside of selector lever housing
  • Frame
  • Nut, 10 Nm

Removing and installing selector lever cable > < Checking and adjusting selector lever cable