Leon Mk2
| Central locking - Assembly overview |
| 1 - | Docking station |
| q | Installation location: on the A-pillar |
| q | To separate the connectors, undo the strut covering. |
| 2 - | Door control unit, passenger side -J387- |
| q | fitted in the electric window motor |
| q | removing |
| – | Remove inner door lining → Bodywork, interior fitting work; Rep. gr.70 |
| 3 - | Docking station |
| q | Installation location: on the B-pillar |
| q | To separate the connectors, undo the strut covering. |
| 4 - | Central locking lock unit, passenger side -F221- |
| q | The lock unit is mounted on the subframe. |
| q | The electric central locking is integrated in the door lock module |
| q | removing |
| – | Remove inner door lining → Bodywork, interior fitting work; Rep. gr.70 |
| 5 - | Door control unit, right rear -J389- |
| q | fitted in the electric window motor |
| q | removing |
| – | Remove inner door lining → Bodywork, interior fitting work; Rep. gr.70 |
| 6 - | Rear right lock unit of the central locking system -F223- |
| q | The lock unit is mounted on the subframe. |
| q | The electric central locking is integrated in the door lock module |
| q | Remove inner door lining → Bodywork, interior fitting work; Rep. gr.70 |
| 7 - | Motor for blocking the fuel tank flap -V155- |
| q | Installation location: under the C-pillar trim |
| q | removing |
| – | Partially separate the boot lining back as far as the wheel housing → General body repairs, interior; Rep. gr.70 |
| 8 - | Rear lid lock |
| q | screwed onto a bracket in the rear lid |
| q | Removing and fitting → Chapter |
| 9 - | Control motor for the rear lid |
| q | screwed onto a bracket for the rear lid |
| q | Removing rear tailgate trim → Bodywork, Interior body installation work; Rep. gr.70 |
| 10 - | Docking station |
| q | Installation location: on the left hand side, behind the side lining of the luggage compartment |
| q | Removing boot trim → General body repairs, interior; Rep. gr.70 |
| 11 - | Rear left lock unit of the central locking system -F222- |
| q | The lock unit is mounted on the subframe. |
| q | The electric central locking is integrated in the door lock module |
| q | Remove inner door lining → Bodywork, interior fitting work; Rep. gr.70 |
| 12 - | Door control unit, left rear -J388- |
| q | fitted in the electric window motor |
| q | Remove inner door lining → Bodywork, interior fitting work; Rep. gr.70 |
| 13 - | Alarm horn |
| q | Installation location: on the left hand side, in front of the rear axle, above the thermal protection for the fuel tank |
| 14 - | Docking station |
| q | Installation location: on the B-pillar |
| q | To separate the connectors, undo the strut covering. |
| 15 - | Central locking lock unit, driver side -F220- |
| q | The lock unit is mounted on the subframe. |
| q | The electric central locking is integrated in the door lock module |
| q | Remove inner door lining → Bodywork, interior fitting work; Rep. gr.70 |
| 16 - | Control set |
| q | Installation location: in the door trim |
| q | Remove inner door lining → Bodywork, interior fitting work; Rep. gr.70 |
| 17 - | Door control unit, driver's side -J386- |
| q | fitted in the electric window motor |
| q | Remove inner door lining → Bodywork, interior fitting work; Rep. gr.70 |
| 18 - | Docking station |
| q | Installation location: on the A-pillar |
| q | To separate the connectors, undo the strut covering. |
| 19 - | Central control unit for comfort system -J393- |
| 20 - | Bonnet lock: |
| q | Bonnet contact switch -F266- |
| q | Installation location: in the lock carrier |
