SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Window seal inside the rear door: Removing and installing >
< Automatic raising or lowering: Commissioning
Leon Mk2
Body
Body, exterior assembly work
Glazing/window mechanism
Rear door windows
Window well seal outside the rear door: Removing and installing
Window well seal outside the rear door: Removing and installing
Window well seal outside the rear door: Removing and installing
Special tools and workshop equipment required
t
Release lever -T10039-
t
Removing
→ Anchor
t
Fitting
→ Anchor
.
Removing
Note
t
The interior element of the seal is metallic. If it is bent, the seal can no longer be straightened. It remains "corrugated".
t
Therefore, the window well seal must be removed evenly without being bent.
–
Open the rear door.
–
Remove the exterior window seal, starting with the end
-arrow A-
.
–
Insert the wedge -T10039/1- between the exterior window well seal and the door and release the window well seal in the direction of the
-arrow-
.
Fitting
.
–
Install the exterior window seal, starting with the end
-arrow A-
.
–
Press the entire surface of the window well seal evenly using the wedge -T10039/1-.
–
Make sure that the entire surface of the exterior window seal is correctly in place in the door flange.
Body
Body, exterior assembly work
Glazing/window mechanism
Rear door windows
Window well seal outside the rear door: Removing and installing
Window seal inside the rear door: Removing and installing >
< Automatic raising or lowering: Commissioning