Leon Mk2
Assembly overview - bulkhead |
Note
The bulkhead -1- is bolted and also bonded in place with PUR adhesive sealant -3-. |
1 - | Bulkhead |
q | Removing: |
– | After unbolting bolts -2-, cut through adhesive bead -3- using suitable means. |
2 - | Body flange |
3 - | PUR adhesive sealant |
q | DH 009 100 03. |
q | Cross section, glue bead: Width = 8 mm, Height = 10 mm |
q | Minimum curing period → Chapter. |
4 - | Bolt. |
q | 10 off |
q | Tightening torque: 25 Nm |