Leon Mk2
| Taking seat out of service position |
| Carry out the following work: |
| Installation is carried out in reverse order. |
| – | Centre the lock carrier with attachment parts in the sills and between both wings: → Rep. gr.00 |
| – | Tightening torque of the screws -4-: 60 Nm. |
| – | Tightening torque of the screws -3-: 8 Nm. |
| – | Tighten rear lower bolt for securing for left and right headlights → Vehicle electrics; Electrical system; Rep. gr.94. |
Note| t | Ensure that the charge air cooler pressure hoses are properly engaged again. |
| t | Hoses and lines must not be pinched. |
