seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Tailgate lock - Assembly overview > < Adjusting tailgate

Leon Mk2

Adjusting buffers
Adjusting buffers
  Note
The work steps described refer to the adjustment buffer on the left side. The steps for the adjustment buffer to be carried out on the right side are similar.
   
–  Loosen the clamp bolt -1- until it is visible over the adjustment stop.
–  Remove the runner from the housing of the -2- adjustment stopper.
–  Close the tailgate by pressing gently in the centre, but only until the first fixing.
–  Open the tailgate again.
  E55-10054
–  Tighten the clamp bolt -1- of the adjustment stop to a depth of -a- = 25 mm.
–  The spring of the pressure pin is triggered to the left or right by turning the buffer knob.
–  Check the adjustment → Rep. gr.00
  E55-10055

Tailgate lock - Assembly overview > < Adjusting tailgate