| –
| Remove the centre radiator grille, starting by loosening the two upper clips -1-. Then loosen the clips -2- from the rear side of the bumper trim. Remove the centre radiator grille. |
| Install the centre radiator grille in the bumper trim |
Note | Do not use hitting tools for installing the plastic parts (rubber, plastic hammer or similar). |
| Installation is done in reverse order of the removal operations; note the following: |
| –
| Fit the lower clips on the grille to the bumper lining. |
| –
| Refit the top clips on the radiator grille of the bumper trim. |
|
|
|
