–
| Unscrew torx bolts -arrows- for mounting bumper panelling to wheelhouse shell. |
–
| Then unscrew torx bolts from lower section of bumper. |
–
| Undo the Phillips screws → Item |
–
| Remove cover on right and left fog lamp → Item with lever -U 30800-. |
–
| Remove bumper panelling by disengaging corners and pulling toward front. |
–
| Disconnect hose for headlamp cleaning system on T-distributor and plug. |
Note Supporting on any of the parts, put an appropriate material between front bumper trim and supporting surface to protect the bumper trim. |
|
|
|