Leon Mk2
| Installation |
| Carry out the following work: |
| – | Fasten existing connectors in place. |
| – | Fit rear bumper cover -1- with the aid of a second mechanic -arrows a-. |
Note| When fitting the rear bumper cover, make sure that it runs parallel along the left and right guide profiles. |
| – | Push rear bumper cover -1- onto left and right guide profile -4--arrows b-, until they engage audibly. |
| – | Check that parts are parallel and gaps are even → Rep. gr.00; Karosseriespaltmaße; Karosserie hinten. |
| – | Tighten bolts -2-. |
| – | Tighten bolts -4- and -5-. |
| – | Tighten bolts -6-. |
| – | Tightening specification for all bolts: → Chapter. |
