Leon Mk2
Removing and installing rear window channel trim strip |
Removal: |
– | Peel sealing lip of window channel -2- away from trim strip slightly -1-. |
– | Push pin of clips -3- in slightly and then lift clips out of window channel -2-. |
– | Evenly pull trim strip -1- out of window channel -2-. |
Installation |
– | Spray window channel -2- with a little soapy water to facilitate installation of decorative trim strip -1-. |
– | Centre decorative trim strip in relation to door edges. |
– | Press trim strip -1- into window channel -2--arrow a-. |
– | Press trim strip -1- into lower lip of window channel -2--arrow b-. |
– | Push upper lip of window channel -2- into mounting of decorative trim strip -arrow c-. |
– | Leave area around clips at front and back -3- free. |
– | Secure clips -3-. |
– | Press last piece of seal into trim strip mounting. |