t
| If an undamaged window is being re-used, cut back the residual adhesive sealant to 1 to 2 mm shortly before bonding it back in. Do not damage primer and ceramic coating when doing this. |
t
| Remaining material serves as adhesion base for newly applied adhesive sealing compound. |
WARNING Exception: if bonding is performed later than one day after cutting back adhesive bead, the remaining residual material must be activated with activator. |
Apply activator evenly in one stroke using applicator. |
Activator must not come in contact with paint, or the paintwork will be damaged. |
Drying time, approx. 10 minutes |
|
Exception: if gluing is not accomplished immediately after cutting back the glue, it is necessary to activate the remaining material with the glass activator. |
|
|
|