Leon Mk2
| Front door window: Assembly overview |
| 1 - | Bolt. |
| t | 2 units |
| t | 3.8 Nm |
| 2 - | Front door window |
| q | removing and fitting → Chapter |
| q | Synchronisation and storage of window course → Chapter |
| 3 - | Window guide |
| q | removing and fitting → Chapter |
| 4 - | Outer A-pillar cover |
| 5 - | Interior window well joint |
| q | removing and fitting → Chapter |
| 6 - | Window frame |
| q | removing and fitting → Chapter |
| 7 - | Inner A-pillar cover |
| 8 - | Bolt. |
| t | 1.3 Nm |
| 9 - | Bolt. |
| t | 1.3 Nm |
| 10 - | Front inner cover |
| 11 - | Bolt. |
| t | 3 units |
| t | 3 Nm |
| 12 - | Electric window riser motor |
| q | removing and fitting → Chapter |
| q | The driver side door control unit -J386- is integrated into the left power window motor -V14- |
| q | The passenger side door control unit -J387- is integrated into the right power window motor -V15- |
| 13 - | Window regulator switch |
| t | Driver's side, 5 buttons |
| q | Removing and installing → Electrical system; Rep. gr.96 |
| 14 - | Door trim |
| q | Removing and installing → Bodywork, interior assembly work; Rep. gr.70 |
| 15 - | Trim panel |
| 16 - | Bolt. |
| t | 4 units |
| t | 1.5 Nm ± 0.5 Nm |
| 17 - | Bolt. |
| t | 2 units |
| t | 1.5 Nm ± 0.5 Nm |
| 18 - | Panel |
| 19 - | Bolt. |
| t | 1.5 Nm |
| 20 - | Bolt. |
| t | 2 units |
| t | 6 Nm |
| 21 - | Bolt. |
| t | 2 units |
| t | 32 Nm ± 15 % |
| 22 - | Bolt. |
| t | 32 Nm ± 15 % |
| 23 - | Bolt. |
| t | 9 Nm |
| 24 - | Spacer element, bracket |
| 25 - | Rubber buffer |
| 26 - | Front door |
| q | removing and fitting → Chapter |
| 27 - | Cap |
| 28 - | Bolt. |
| t | 32 Nm ± 15 % |
| 29 - | Retaining clip |
| t | 5x |
| 30 - | Exterior window seal |
| q | removing and fitting → Chapter |
| 31 - | Window regulator |
| q | removing and fitting → Chapter |
| 32 - | Exterior window well seal with chrome plated trim |
| q | removing and fitting → Chapter |
| 33 - | Bolt. |
| t | 2 units |
| t | 6 Nm |
