Leon Mk2
| Installing door window |
| Carry out the following work: |
| – | Push door window -1- in -direction of arrow a- into window channels at an angle from above. |
Note| Ensure that door window is properly located in window channel. |
| – | Guide door window without force into clamping jaws -3-. |
| – | Centre door window in window channels -arrow b- |
Note| The bolts -6- have left-handed threads. |
| – | Tighten clamping bolts -5- (2 bolts). Tightening torque: 8 Nm |
| – | Then perform remaining installation in reverse order of removal. |
| l | Carry out functional test before fitting door trim. |
