Leon Mk2
|
WARNING
| Carry out the following work: |
| l | Fit cable drum -4- so that it is correctly latched into door with all locking hooks. |
| – | Slot window regulator motor -1- onto mounting brackets of cable drum -4-. Move door window up and down slightly so that the splines between motor and cable drum engage more easily. |
| – | Secure connectors -3-. |
| Torque for the screws -2-: 3 Nm. |
| – | A new window regulator motor is coded using vehicle diagnosis and service information system -VAS 5052 A-. |
| – | After coding, allow window regulators to move up to stop once automatically. Then pull switch again for 2 seconds. This programs the upper stop for the window regulator motor. |
| – | Then perform remaining installation in reverse order of removal. |
