seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing striker plate > < Removal:

Leon Mk2

Installation
   
Installation
Locating peg
  Caution
The markings -arrow a- on the rear of the locking pegs -1- must be observed when pegs are being mounted.
There are 4 different locking pegs.
t  The locking peg with the markings -arrow a-„L“ and „arrow pointing upwards“ is mounted at the top in the left door.
t  The locking peg with the markings -arrow a-„L“ and „arrow pointing downwards“ is mounted at the top in the left door.
t  The locking peg with the markings -arrow a-„R“ and „arrow pointing upwards“ is mounted at the top in the right door.
t  The locking peg with the markings -arrow a-„R“ and „arrow pointing downwards“ is mounted at the bottom in the right door.
–  Tightening torque for the bolts -2-: 20 Nm.
Catch plate
  Caution
The catch plates -4- are wider at the bottom than at the top.
The „code“-arrow b- must match the contour on the B-pillar.
–  Tightening torque for the bolts -5-: 50 Nm.

   

Removing and installing striker plate > < Removal: