Leon Mk2
Removal: |
Carry out the following work: |
– | Remove sliding door trim → General body repairs, interior; Rep. gr.70. |
– | Remove cover → Chapter |
– | Disconnect battery → Vehicle electrics; Rep. gr.27 |
– | Remove door lock → Chapter. |
– | Push the rubber catches -9- of the power latching system -10- into the door -arrows a-. |
– | Remove the electrical connector. |
– | Remove power latching system -10- from door. |
Note
The Bowden cable can be detached if this is necessary for subsequent work. |
Detaching Bowden cable leading to door lock |
– | Open protective cap on door lock -1--arrows b-. |
– | Take cable -4- out of relay pulley -arrow d-. |
– | Remove cable -4- from mounting -arrows e-. |