seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Rear door - assembly > < Rear door - removing and installing

Leon Mk2

Remove rear door
Remove rear door
–  Open the rear door.
   
–  Remove rubber bellows -2- from B-pillar and disconnect all connectors.
–  Unscrew the nuts -1- from the top hinge.
–  Unscrew lower bolt -3- with spanner -T20042- from lower hinge.
  Note
Always replace bolt -3- and nut -1-.
–  Lift the door up and out from the hinge bracket.
  Note
Lay door down on suitable subsurface to protect against damage.
  E58-0006

Rear door - assembly > < Rear door - removing and installing