Leon Mk2
| Removal: |
| Carry out the following work: |
| – | Remove sliding door trim → General body repairs, interior; Rep. gr.70. |
| – | Remove covers → Chapter |
| – | Removing bearing bracket → Chapter |
| – | Also detach fastenings. |
| – | Release distributing mechanism -1- from catches -arrow a-. |
Note| Bowden cables can be detached if this is necessary for subsequent work. |
| Detaching Bowden cable leading to arrester |
| – | Take Bowden cable -8- out of distributing mechanism -1--arrow b-. |
| – | Thread Bowden cable out of eye -arrow c-. |
