Leon Mk2
| Installation |
| – | Lift assembly frame -1- into vehicle with the help of at least a second mechanic. |
| – | When bolting assembly frame, use 2 cylindrical pins (reversed drill bits Ø 10mm) to align frame with centring holes -a- (oblong hole) and -b- and with roof. |
| – | Screw in bolts -2- but do not fully tighten. |
| Bolts must be tightened in specified sequence -1 to 10-. |
| – | Tightening torque for screws: 8 Nm. |
| – | Then tighten the remaining screws -arrows-, tightening torque: 8 Nm. |
|
