Leon Mk2
| Removal: |
| – | Remove front glass panel → Chapter. |
| – | Remove rear glass panel → Chapter. |
| – | Remove sun blind → Chapter. |
| – | Remove assembly frame from vehicle → Chapter. |
| – | Pull interior seal -2- off assembly frame -1-. |
| – | Remove any adhesive residue with adhesive strip remover -VAS 6349-. |
| – | Release wiring harness from rear section. |
| – | Mark position -arrow- of rear part -1- in relation to guide rails -4- for purposes of later installation. |
| – | Remove bolts -2-. |
| – | Separate bonded connection -5- between guide rail -4- and rear part -1-, using a knife. |
| – | Pull entire rear part -1- together with discharge tubes -3- out of guide rails -4-. |
